Xerox VersaLink B7025 Service Manual

April 2017
2-263
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
018-706, 018-707, 018-708
Status Indicator RAPs
Launch Issue
018-706 LDAP Protocol Error 06 RAP
018-706 LDAP protocol error 06 at address book operation (comparison request result is true).
Procedure
Perform the steps that follow:
1. For a single occurrence, take no action.
2. If the fault persists, switch off, then switch on the machine, GP 10.
018-707, 018-708 LDAP Protocol Errors 07 and 08 RAP
018-707 LDAP protocol error 07 at address book operation (the specified authentication
method is not supported).
018-708 LDAP protocol error 08 at address book operation (strong authentication is required)
Procedure
Verify that print jobs are printing or print a configuration report and verify that network setup
settings are indicated.
The printer is operational or the configuration report indicates
valid network settings.
YN
Check for damage with the network connection. If there is no damage then there is a
problem with the network. Inform the customer that the network requires service.
There is a problem with the LDAP setups on the machine or with the remote LDAP server.
Advise the customer to verify the machine LDAP setups. If the check is good, there may be a
problem with the remote LDAP server.

Xerox VersaLink B7025 Specifications

General

Print Speed	Up to 25 ppm
Print Resolution	Up to 1200 x 1200 dpi
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Control Panel	5-inch color touchscreen
Duplex Printing	Standard
Processor	1.05 GHz
Memory	2 GB
Paper Output	250 sheets
Fax Speed	33.6 kbps
Fax Transmission Speed	3 seconds per page
Display	5-inch color touchscreen
Connectivity	Ethernet 10/100/1000 Base-T, High-speed USB 3.0
Functions	Print, Copy, Scan
Media Sizes Supported	A4, A5, A6, B5
Printer Type	Laser
Copy Speed	Up to 25 ppm
Mobile Printing	Apple AirPrint, Google Cloud Print, Xerox Print Service Plug-in for Android