Xerox VersaLink B7025 Service Manual

April 2017
2-194
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
016-752, 016-753
Launch Issue
Status Indicator RAPs
016-752 PDF Short of Memory RAP
016-752 Insufficient memory was detected during PDF bridge processing.
Procedure
Perform the steps that follow:
1. Advise the customer to:
a. Change the print mode. When the print mode is set to High Quality, change the set-
ting to Normal. When the print mode is set to Standard, change the setting to High
Speed.
b. Print using a driver from Acrobat Reader.
2. If the fault persists, reload the software, GP 4.
016-753 PDF Password Mismatched RAP
016-753 When processing a PDF file that is protected by a password, the password in the UI
panel settings and the password specified using XPJL (set in the contents bridge utility) do not
match.
Procedure
Perform the steps that follow:
1. Advise the customer to specify the correct password using the UI or the contents bridge.
2. If the fault persists, reload the software, GP 4.

Xerox VersaLink B7025 Specifications

General

Print Speed	Up to 25 ppm
Print Resolution	Up to 1200 x 1200 dpi
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Control Panel	5-inch color touchscreen
Duplex Printing	Standard
Processor	1.05 GHz
Memory	2 GB
Paper Output	250 sheets
Fax Speed	33.6 kbps
Fax Transmission Speed	3 seconds per page
Display	5-inch color touchscreen
Connectivity	Ethernet 10/100/1000 Base-T, High-speed USB 3.0
Functions	Print, Copy, Scan
Media Sizes Supported	A4, A5, A6, B5
Printer Type	Laser
Copy Speed	Up to 25 ppm
Mobile Printing	Apple AirPrint, Google Cloud Print, Xerox Print Service Plug-in for Android