Xerox VersaLink B7025 Service Manual

April 2017
2-419
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
033-508, 033-511, 033-509
Status Indicator RAPs
Launch Issue
033-508, 033-511 Destination Polling Error RAP
033-508 No polling document in the remote machine.
033-511 DTS/NSC resending exceeded the limit.
Procedure
Perform the steps that follow:
1. Advise the customer to check the destination machine for a problem, for example a docu-
ment jam or mismatched password or request a polling document to prepared. Then
repeat the operation.
2. If the fault persists, perform the 033-312, 033-313, 033-315 to 033-327 Fax Fault RAP.
033-509 DCS/NSS Resend Exceeded RAP
033-509 DCS/NSS re-send over.
Procedure
Perform the steps that follow:
1. Advise the customer to repeat the operation. If the problem persists after repeating the
operation, check the status of the receiver at the destination side.
2. If the fault persists, perform the 033-312, 033-313, 033-315 to 033-327 Fax Fault RAP.

Xerox VersaLink B7025 Specifications

General

Print Speed	Up to 25 ppm
Print Resolution	Up to 1200 x 1200 dpi
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Control Panel	5-inch color touchscreen
Duplex Printing	Standard
Processor	1.05 GHz
Memory	2 GB
Paper Output	250 sheets
Fax Speed	33.6 kbps
Fax Transmission Speed	3 seconds per page
Display	5-inch color touchscreen
Connectivity	Ethernet 10/100/1000 Base-T, High-speed USB 3.0
Functions	Print, Copy, Scan
Media Sizes Supported	A4, A5, A6, B5
Printer Type	Laser
Copy Speed	Up to 25 ppm
Mobile Printing	Apple AirPrint, Google Cloud Print, Xerox Print Service Plug-in for Android