Xerox VersaLink B7025 Service Manual

April 2017
2-298
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
021-701, 021-732, 941, 943, 945
Launch Issue
Status Indicator RAPs
021-701 Accessory Preparing RAP
021-701 EP accessory - service canceled by USB accessory preparing.
Procedure
Perform the steps that follow:
1. Advise the customer to wait for a minimum of 3 minutes for the USB accessory to start,
then re-run the job
2. If the fault persists, reload the software, GP 4.
021-732, 941, 943, 945 EP Accessory Error RAP
021-732 EP accessory - service canceled by disable.
021-941 EP accessory - scan service paused by disable.
021-943 EP accessory - print service paused by disable.
021-945 EP accessory - service paused by disable.
Procedure
Perform the steps that follow:
1. Advise the customer to insert a Xerox card, copy card or cash into the accessory, and
ensure that there are sufficient fees or card value.
2. If the fault persists, reload the software, GP 4.

Xerox VersaLink B7025 Specifications

General

Print Speed	Up to 25 ppm
Print Resolution	Up to 1200 x 1200 dpi
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Control Panel	5-inch color touchscreen
Duplex Printing	Standard
Processor	1.05 GHz
Memory	2 GB
Paper Output	250 sheets
Fax Speed	33.6 kbps
Fax Transmission Speed	3 seconds per page
Display	5-inch color touchscreen
Connectivity	Ethernet 10/100/1000 Base-T, High-speed USB 3.0
Functions	Print, Copy, Scan
Media Sizes Supported	A4, A5, A6, B5
Printer Type	Laser
Copy Speed	Up to 25 ppm
Mobile Printing	Apple AirPrint, Google Cloud Print, Xerox Print Service Plug-in for Android