EasyManuals Logo

Xerox VersaLink B7025 Service Manual

Xerox VersaLink B7025
1341 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #554 background imageLoading...
Page #554 background image
April 2017
2-534
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
117-317, 117-318, 117-319
Launch Issue
Status Indicator RAPs
117-317, 117-318 Contract Manager PPP RAP
117-317 The contract manager detected that the PPP contract has ended.
117-318 The contract manager detected that the DC command write that was performed at the
end of a PPP contract has failed.
Procedure
Advise the customer to wait for the machine to reboot.
117-319 SD Card Program or Font Data Access RAP
117-319 SD card program or font data access fail.
Procedure
WARNING
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
Perform the steps that follow:
1. Switch off, then switch on the machine, GP 10.
2. Ensure the SD card, PL 3.10 Item 11 is correctly installed. Also, ensure that the write pro-
tection switch, to the left of the SD card, is not enabled. If the installation of the SD card
and the write protection switch setting are good, advise the customer to rewrite the pro
-
gram and font data into the SD Card. If the problem persists after the rewrite, install a new
SD card, PL PL 3.10 Item 11.
3. Ensure that all connectors on the drive PWB, PL 1.10 Item 3 and the ESS PWB, PL 3.10
Item 6 are securely connected. Ensure all surface mounted modules on both PWBs are
securely connected.
4. Reload the software, GP 4.
5. Perform the OF2 Special Boot Modes RAP.

Table of Contents

Other manuals for Xerox VersaLink B7025

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox VersaLink B7025 and is the answer not in the manual?

Xerox VersaLink B7025 Specifications

General IconGeneral
Print SpeedUp to 25 ppm
Print ResolutionUp to 1200 x 1200 dpi
Copy ResolutionUp to 600 x 600 dpi
Scan ResolutionUp to 600 x 600 dpi
Control Panel5-inch color touchscreen
Duplex PrintingStandard
Processor1.05 GHz
Memory2 GB
Paper Output250 sheets
Fax Speed33.6 kbps
Fax Transmission Speed3 seconds per page
Display5-inch color touchscreen
ConnectivityEthernet 10/100/1000 Base-T, High-speed USB 3.0
FunctionsPrint, Copy, Scan
Media Sizes SupportedA4, A5, A6, B5
Printer TypeLaser
Copy SpeedUp to 25 ppm
Mobile PrintingApple AirPrint, Google Cloud Print, Xerox Print Service Plug-in for Android

Related product manuals