Xerox VersaLink B7025 Service Manual

April 2017
2-342
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
026-712, 026-718
Launch Issue
Status Indicator RAPs
026-712 HTTP Out Job Overlap Error RAP
026-712 The high compression/OCR processing module has detected that a job that specifies
high compression/OCR processing and is to be taken out using HTTP has started while
another job to be sent via the network is undergoing high compression/OCR processing.
Procedure
For information only, no service action necessary. Advise the customer that as a job specifying
high compression/OCR processing is in progress, wait until the job is complete before running
another job.
026-718 PS Print Instruction Fail RAP
026-718 An erroneous combination of print parameters selected (finishing, paper size, paper
tray, Duplex instructions, output tray) prevents the machine from running the job.
Procedure
Perform the steps that follow:
1. Advise the customer to correctly set finishing, paper size, paper tray, duplex instructions,
and output tray options, then re-run the job.
2. If the fault persists, reload the software, GP 4.

Xerox VersaLink B7025 Specifications

General

Print Speed	Up to 25 ppm
Print Resolution	Up to 1200 x 1200 dpi
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Control Panel	5-inch color touchscreen
Duplex Printing	Standard
Processor	1.05 GHz
Memory	2 GB
Paper Output	250 sheets
Fax Speed	33.6 kbps
Fax Transmission Speed	3 seconds per page
Display	5-inch color touchscreen
Connectivity	Ethernet 10/100/1000 Base-T, High-speed USB 3.0
Functions	Print, Copy, Scan
Media Sizes Supported	A4, A5, A6, B5
Printer Type	Laser
Copy Speed	Up to 25 ppm
Mobile Printing	Apple AirPrint, Google Cloud Print, Xerox Print Service Plug-in for Android