Xerox VersaLink B7025 Service Manual

April 2017
2-288
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
021-214, 021-215
Launch Issue
Status Indicator RAPs
021-214 USB IC Card Reader Encryption Setting RAP
021-214 Failure in the USB IC card reader encryption settings.
Procedure
Perform the steps that follow:
1. Switch off, then switch on the machine, GP 10.
2. Advise the customer that the encryption settings of the connected USB IC card reader are
wrong. Connect an USB IC card reader that has never been used before, or one that has
had its encryption settings initialized as factory default settings to the machine. Switch off,
then switch on the machine, GP 10.
021-215 Invalid Accessory Type Setting RAP
021-215 Invalid accessory type setting.
Procedure
Perform the steps that follow:
1. Enter dC131. Set NVM value 850-007 to the appropriate one for the connected acces-
sory. Switch off, then switch on the machine, GP 10.
2. Or replace the connected accessory with the appropriate one for the setting. Switch off,
then switch on the machine, GP 10.

Xerox VersaLink B7025 Specifications

General

Print Speed	Up to 25 ppm
Print Resolution	Up to 1200 x 1200 dpi
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Control Panel	5-inch color touchscreen
Duplex Printing	Standard
Processor	1.05 GHz
Memory	2 GB
Paper Output	250 sheets
Fax Speed	33.6 kbps
Fax Transmission Speed	3 seconds per page
Display	5-inch color touchscreen
Connectivity	Ethernet 10/100/1000 Base-T, High-speed USB 3.0
Functions	Print, Copy, Scan
Media Sizes Supported	A4, A5, A6, B5
Printer Type	Laser
Copy Speed	Up to 25 ppm
Mobile Printing	Apple AirPrint, Google Cloud Print, Xerox Print Service Plug-in for Android