Xerox VersaLink B7025 Service Manual

April 2017
2-210
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
016-981, 982, 016-983
Launch Issue
Status Indicator RAPs
016-981, 982 HDD Access Error 2 RAP
BSD-ON: BSD 3.9 ESS
016-981 HDD was determined to be full due to scan to email, scan to fax, secure print, delayed
print or sample print was specified when the HDD capacity is low.
016-982 HDD was determined to be full due to collate, stored or interrupted jobs.
Procedure
Perform the steps that follow:
1. Advise the customer to:
a. Process or delete the jobs (documents) stored in the same HDD partition, then
repeat the operation.
b. If step A does not resolve the problem, expand the HDD partition size of the relevant
service.
2. Reload the software, GP 4.
3. Check the wiring between the ESS PWB, PL 3.10 Item 6 and the hard disk.
4. Initialise the hard disk. Refer to dC355 Hard Disk Diagnostics.
5. Initialize the Sys - System NVM, refer to dC301.
6. Install a new hard disk, PL 3.10 Item 2.
016-983 Image Log HDD Full RAP
016-983 With the system data level of ensuring log image creation set to High, the log image
storage area on the disk becomes full (during processing a copy/scan job).
Procedure
Advise the customer to:
1. Cancel the job.
2. Re-run the job.
3. Delete unnecessary documents saved on the machine or change the level of ensuring
creation (to Low).

Xerox VersaLink B7025 Specifications

General

Print Speed	Up to 25 ppm
Print Resolution	Up to 1200 x 1200 dpi
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Control Panel	5-inch color touchscreen
Duplex Printing	Standard
Processor	1.05 GHz
Memory	2 GB
Paper Output	250 sheets
Fax Speed	33.6 kbps
Fax Transmission Speed	3 seconds per page
Display	5-inch color touchscreen
Connectivity	Ethernet 10/100/1000 Base-T, High-speed USB 3.0
Functions	Print, Copy, Scan
Media Sizes Supported	A4, A5, A6, B5
Printer Type	Laser
Copy Speed	Up to 25 ppm
Mobile Printing	Apple AirPrint, Google Cloud Print, Xerox Print Service Plug-in for Android