Xerox VersaLink B7025 Service Manual

April 2017
2-176
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
016-705, 016-706
Launch Issue
Status Indicator RAPs
016-705 Secure Print Fail RAP
016-705 Unable to perform secure print/mailbox print/pay for print storing from the printer
driver. Unable to store scanned documents into a mailbox.
Procedure
Perform the steps that follow:
1. Advise the customer to check that the required optional software is installed and enabled.
Also check that the correct print driver is being used.
2. If the fault persists, perform the steps that follow:
a. Reload the software, GP 4.
b. Check the wiring between the ESS PWB, PL 3.10 Item 6 and the hard disk.
c. Initialise the hard disk. Refer to dC355 Hard Disk Diagnostics.
d. Initialize the Sys - System NVM, refer to dC301.
e. Install new components as necessary:
• Hard disk, PL 3.10 Item 2.
• ESS PWB, PL 3.10 Item 6.
016-706 Maximum User Number Exceeded RAP
016-706 The system detected that a job exceeded the maximum number of users for secure
and sample prints and aborted the job.
Procedure
Perform the steps that follow:
1. Advise the customer to delete unnecessary documents or users, then repeat the opera-
tion.
2. If the fault persists, reload the software, GP 4.

Xerox VersaLink B7025 Specifications

General

Print Speed	Up to 25 ppm
Print Resolution	Up to 1200 x 1200 dpi
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Control Panel	5-inch color touchscreen
Duplex Printing	Standard
Processor	1.05 GHz
Memory	2 GB
Paper Output	250 sheets
Fax Speed	33.6 kbps
Fax Transmission Speed	3 seconds per page
Display	5-inch color touchscreen
Connectivity	Ethernet 10/100/1000 Base-T, High-speed USB 3.0
Functions	Print, Copy, Scan
Media Sizes Supported	A4, A5, A6, B5
Printer Type	Laser
Copy Speed	Up to 25 ppm
Mobile Printing	Apple AirPrint, Google Cloud Print, Xerox Print Service Plug-in for Android