Xerox VersaLink B7025 Service Manual

April 2017
2-426
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
033-548, 033-549, 551, 583
Launch Issue
Status Indicator RAPs
033-548 No Manual Send Line RAP
033-548 There are no lines for manual transmission.
Procedure
Perform the steps that follow:
1. Use a phone to establish communications, then advise the customer to repeat the opera-
tion.
2. If the fault persists, perform the 033-312, 033-313, 033-315 to 033-327 Fax Fault RAP.
033-549, 551, 583 Fax Service Disabled RAP
033-549 The system cannot receive the service because it was prohibited to do the operation.
033-551 When a phone or fax communication was about to end, an operation was performed
on that job.
033-583 The request received a connection refused response because the target connection is
temporarily out of resource.
Procedure
Perform the steps that follow:
1. Advise the customer to wait for a while, then repeat the operation.
2. If the fault persists, perform the 033-312, 033-313, 033-315 to 033-327 Fax Fault RAP.

Xerox VersaLink B7025 Specifications

General

Print Speed	Up to 25 ppm
Print Resolution	Up to 1200 x 1200 dpi
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Control Panel	5-inch color touchscreen
Duplex Printing	Standard
Processor	1.05 GHz
Memory	2 GB
Paper Output	250 sheets
Fax Speed	33.6 kbps
Fax Transmission Speed	3 seconds per page
Display	5-inch color touchscreen
Connectivity	Ethernet 10/100/1000 Base-T, High-speed USB 3.0
Functions	Print, Copy, Scan
Media Sizes Supported	A4, A5, A6, B5
Printer Type	Laser
Copy Speed	Up to 25 ppm
Mobile Printing	Apple AirPrint, Google Cloud Print, Xerox Print Service Plug-in for Android