Xerox VersaLink B7025 Service Manual

April 2017
2-418
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
033-363, 033-500 to 033-507
Launch Issue
Status Indicator RAPs
033-363 Fax Card Reset (Reboot) RAP
033-363 The controller reset the fax card because the fax card did not respond.
Procedure
Perform the 033-312, 033-313, 033-315 to 033-327 Fax Fault RAP.
033-500 to 033-507 Remote Machine Error RAP
033-500 Modem CS operation error.
033-501 The number of receive line is 0.
033-502 There was no response for up to the 3rd post message.
033-503 T1 timeout has occurred.
033-504 T2 timeout has occurred.
033-505 T5 timeout has occurred.
033-506 DCN received.
033-507 No receiving capability in the remote machine.
Procedure
Perform the steps that follow:
1. Advise the customer to check the status of the remote machine, If the remote machine is
good, repeat the operation.
2. If the fault persists, perform the 033-312, 033-313, 033-315 to 033-327 Fax Fault RAP.

Xerox VersaLink B7025 Specifications

General

Print Speed	Up to 25 ppm
Print Resolution	Up to 1200 x 1200 dpi
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Control Panel	5-inch color touchscreen
Duplex Printing	Standard
Processor	1.05 GHz
Memory	2 GB
Paper Output	250 sheets
Fax Speed	33.6 kbps
Fax Transmission Speed	3 seconds per page
Display	5-inch color touchscreen
Connectivity	Ethernet 10/100/1000 Base-T, High-speed USB 3.0
Functions	Print, Copy, Scan
Media Sizes Supported	A4, A5, A6, B5
Printer Type	Laser
Copy Speed	Up to 25 ppm
Mobile Printing	Apple AirPrint, Google Cloud Print, Xerox Print Service Plug-in for Android