Xerox VersaLink B7025 Service Manual

April 2017
2-538
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
117-333, 117-339
Launch Issue
Status Indicator RAPs
117-333 Uninitialized Used SD Card RAP
117-333 An uninitialized SD card that was used for another device was detected.
Procedure
Perform the steps that follow:
1. Initialize the NVM, perform dC301 NVM Initialization.
2. If a HDD is installed, initialise the HDD, refer to dC355 Hard Disk Diagnostics.
117-339 NVM Backup Fail RAP
117-339 NVM backup is not carried out fail.
Procedure
Initialise the HDD, refer to dC355 Hard Disk Diagnostics.

Xerox VersaLink B7025 Specifications

General

Print Speed	Up to 25 ppm
Print Resolution	Up to 1200 x 1200 dpi
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Control Panel	5-inch color touchscreen
Duplex Printing	Standard
Processor	1.05 GHz
Memory	2 GB
Paper Output	250 sheets
Fax Speed	33.6 kbps
Fax Transmission Speed	3 seconds per page
Display	5-inch color touchscreen
Connectivity	Ethernet 10/100/1000 Base-T, High-speed USB 3.0
Functions	Print, Copy, Scan
Media Sizes Supported	A4, A5, A6, B5
Printer Type	Laser
Copy Speed	Up to 25 ppm
Mobile Printing	Apple AirPrint, Google Cloud Print, Xerox Print Service Plug-in for Android