Xerox VersaLink B7025 Service Manual

April 2017
2-23
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
003-751, 003-752, 932, 935
Status Indicator RAPs
Launch Issue
003-751 Capacity RAP
003-751 According to the document area settings and the scan area, processing image data
with a size smaller than the one that can be processed was detected.
Procedure
Perform the steps that follow:
1. Advise the customer to increase the resolution or enlarge the scan area (width x length),
then retry the job.
2. If the fault persists, reload the software, GP 4.
003-752, 932, 935 600dpi Cannot be Scanned RAP
003-752 600dpi is unavailable for DADF mixed 2-sided mode scan.
003-932 For scanning in the DADF mix duplex mode, 600dpi is not available.
003-935 For scanning in the DADF mix duplex mode, 600dpi is not available (when the next
document exists).
Procedure
Perform the steps that follow:
1. Advise the customer to perform scanning below 400 dpi resolution.
2. If the fault persists, reload the software, GP 4.

Xerox VersaLink B7025 Specifications

General

Print Speed	Up to 25 ppm
Print Resolution	Up to 1200 x 1200 dpi
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Control Panel	5-inch color touchscreen
Duplex Printing	Standard
Processor	1.05 GHz
Memory	2 GB
Paper Output	250 sheets
Fax Speed	33.6 kbps
Fax Transmission Speed	3 seconds per page
Display	5-inch color touchscreen
Connectivity	Ethernet 10/100/1000 Base-T, High-speed USB 3.0
Functions	Print, Copy, Scan
Media Sizes Supported	A4, A5, A6, B5
Printer Type	Laser
Copy Speed	Up to 25 ppm
Mobile Printing	Apple AirPrint, Google Cloud Print, Xerox Print Service Plug-in for Android