Xerox VersaLink B7025 Service Manual

April 2017
2-212
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
016A
Launch Issue
Status Indicator RAPs
c. In the Command window (where the blinking cursor is) type ping. Press the space
bar once, then enter the IP address of the machine. Press Enter.
d. If the ping command is successful, the machine will reply four times. This should not
take more than two or three seconds.
e. If the ping command times out, or responds with ‘host unreachable’, check the IP
address that was entered. If the IP address is correct, contact 2nd level support.
2. Attempt to send a scan job from the machine, if the scan to job did not complete, contact
2nd level support.

Xerox VersaLink B7025 Specifications

General

Print Speed	Up to 25 ppm
Print Resolution	Up to 1200 x 1200 dpi
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Control Panel	5-inch color touchscreen
Duplex Printing	Standard
Processor	1.05 GHz
Memory	2 GB
Paper Output	250 sheets
Fax Speed	33.6 kbps
Fax Transmission Speed	3 seconds per page
Display	5-inch color touchscreen
Connectivity	Ethernet 10/100/1000 Base-T, High-speed USB 3.0
Functions	Print, Copy, Scan
Media Sizes Supported	A4, A5, A6, B5
Printer Type	Laser
Copy Speed	Up to 25 ppm
Mobile Printing	Apple AirPrint, Google Cloud Print, Xerox Print Service Plug-in for Android