EasyManuals Logo

Xerox VersaLink B7025 Service Manual

Xerox VersaLink B7025
1341 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #461 background imageLoading...
Page #461 background image
April 2017
2-441
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
033-731, 732, 736, 740, 747, 748, 749, 033-733, 735,
Status Indicator RAPs
Launch Issue
033-731, 732, 736, 740, 747, 748, 749 Inconsistent
Instructions RAP
033-731 Transmission closed due to start transmission from fax card and stop transmission
from controller.
033-732 Print job received was cancelled at forced polling.
033-736 The data amount for fax transfer exceeded the threshold during fax transfer of internet
fax off ramp.
033-740 The user cancelled immediate printing upon receiving.
033-747 When requesting to start the service from the fax card, the job could not be generated
due to causes such as job number overflow.
033-748 During service sequencing, an illegal operation was detected.
033-749 During fax formatting, the extended image data is larger than the memory reserved.
Procedure
For information only. No service action necessary.
033-733, 735, 741, 743, 744, 745, 746, 750 Fax Document
Number Error RAP
033-733 The number of job documents related to the job could not be obtained.
033-735 Fax receive - buffer allocate timeout.
033-741 When transferring image data to the fax card, the conditions for sending the response
to the fax card did not match.
033-743 When receiving image data from the fax card, the conditions for sending the response
to the fax card did not match.
033-744 When receiving image data from the fax card, the conditions for sending the response
to the fax card did not match.
033-745 When receiving image data from the fax card, the conditions for sending the response
to the fax card did not match.
033-746 When transferring image data to the fax card, the conditions for sending the response
to the fax card did not match.
033-750 During formatting, when image data was retrieved from the fax card, even though the
image data was determined to be free from error, extension failed.
Procedure
Perform the steps that follow:
1. Advise the customer to repeat the operation.
2. If the fault persists, perform the 033-312, 033-313, 033-315 to 033-327 Fax Fault RAP.

Table of Contents

Other manuals for Xerox VersaLink B7025

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox VersaLink B7025 and is the answer not in the manual?

Xerox VersaLink B7025 Specifications

General IconGeneral
Print SpeedUp to 25 ppm
Print ResolutionUp to 1200 x 1200 dpi
Copy ResolutionUp to 600 x 600 dpi
Scan ResolutionUp to 600 x 600 dpi
Control Panel5-inch color touchscreen
Duplex PrintingStandard
Processor1.05 GHz
Memory2 GB
Paper Output250 sheets
Fax Speed33.6 kbps
Fax Transmission Speed3 seconds per page
Display5-inch color touchscreen
ConnectivityEthernet 10/100/1000 Base-T, High-speed USB 3.0
FunctionsPrint, Copy, Scan
Media Sizes SupportedA4, A5, A6, B5
Printer TypeLaser
Copy SpeedUp to 25 ppm
Mobile PrintingApple AirPrint, Google Cloud Print, Xerox Print Service Plug-in for Android

Related product manuals