Xerox WorkCentre 3615

Troubleshooting
Phaser 3610, WorkCentre 3615 Service Manual 2-111
116-313
Device Memory Error 116-313
Power Off/On the Printer.
If this failure occurs again,
please contact customer sup-
port.
<Encryption Setting Error>
Cause:
Encryption setting mismatch.
FIP 1. 298
116-314
MAC Address Error
Power Off/On the Printer.
If this failure occurs again,
please contact customer sup-
port.
<MAC Address Error>
Cause:
On Board Network MAC Address
Checksum Error.
FIP 1. 299
116-315
Controller Memory RAM Error
Power Off/On the Printer.
If this failure occurs again,
please contact customer sup-
port.
<ESS On Board RAM W/R Check Fail>
Cause:
Detected by On Board RAM W/R Check
at the time of initialization.
FIP 1. 300
116-317
Controller ROM Error
Power Off/On the Printer.
If this failure occurs again,
please contact customer sup-
port.
<ESS ROM Check (Main) Fail>
Cause:
Main Program ROM checksum error.
FIP 1. 302
116-323
Controller NVRAM Error
Power Off/On the Printer.
If this failure occurs again,
please contact customer sup-
port.
<ESS NVRAM1 W/R Check Fail>
Cause:
Detected by master NVRAM W/R
check.
FIP 1. 303
116-324
Controller Error
Power Off/On the Printer.
If this failure occurs again,
please contact customer sup-
port.
<ESS Illegal Exception>
Cause:
CPU illegal exception.
FIP 1. 303
116-326
Controller NVRAM Error
Power Off/On the Printer.
If this failure occurs again,
please contact customer sup-
port.
ESS NVRAM2 W/R Check Fail
Cause:
Detected by master NVRAM W/R
check.
FIP 1. 304
Status
Code
(3615)
LCD Display Name/Description of Error FIP