Xerox WorkCentre 3615

Troubleshooting
Phaser 3610, WorkCentre 3615 Service Manual 2-113
116-355
Network Error 116-355
Power Off/On the Printer.
If this failure occurs again,
please contact customer sup-
port.
<Network Error>
Cause:
On Board Network Fatal Error.
FIP 1. 309
116-356
Device Memory Error 116-356
Power Off/On the Printer.
If this failure occurs again,
please contact customer sup-
port.
<SD CARD Overwrite Error>
Cause:
Error has occurred during SD CARD
overwrite.
FIP 1. 310
116-361
Controller PCI Error 116-361
Power Off/On the Printer.
If this failure occurs again,
please contact customer sup-
port.
<PCI Bus #0 Error Detected>
Cause:
PCI Bus #0 Uncorrectable Error
Detected.
(Connected with Remora EX(x4 port))
FIP 1. 311
116-362
Controller PCI Error 116-362
Power Off/On the Printer.
If this failure occurs again,
please contact customer sup-
port.
<PCI Bus #0 Host Bridge Controller
Error>
Cause:
PCI Bus #0 Host Bridge Controller
Error. (Connected with Remora EX
port)
FIP 1. 312
116-363
Controller PCI Error 116-363
Power Off/On the Printer.
If this failure occurs again,
please contact customer sup-
port.
<PCI Bus #1 Host Bridge Controller
Error>
Cause:
PCI Bus #1 Host Bridge Controller
Error. (Connected with Remora EX
port.)
FIP 1. 313
116-364
Controller Clock Error 116-364
Power Off/On the Printer.
If this failure occurs again,
please contact customer sup-
port.
<Timer Fail>
Cause:
Timer error is detected.
FIP 1. 314
116-366
Controller PCI Error 116-366
Power Off/On the Printer.
If this failure occurs again,
please contact customer sup-
port.
<PCI Bus #1 Error Detected>
Cause:
PCI Bus #1 Uncorrectable Error
Detected.
(Connected with RemoraEX(x1 port))
FIP 1. 315
Status
Code
(3615)
LCD Display Name/Description of Error FIP