Xerox WorkCentre 3615

Troubleshooting
Phaser 3610, WorkCentre 3615 Service Manual2-114
116-368
Controller PCI Error 116-368
Power Off/On the Printer.
If this failure occurs again,
please contact customer sup-
port.
<PCI Error Messages received from Bus
#0 - Device #1>
Cause:
Remora EX PCI x1 port Error. (Device
ID 0x65 (x1))
FIP 1. 316
116-369
Controller PCI Error 116-369
Power Off/On the Printer.
If this failure occurs again,
please contact customer sup-
port.
<PCI Error Messages received from Bus
#0 - Device #0>
Cause:
Remora EX PCI x4 port Error. (Device
ID 0x64 (x4))
FIP 1. 317
116-390
Controller NVRAM Error 116-
390
Power Off/On the Printer.
If this failure occurs again,
please contact customer sup-
port.
<ESS NVRAM1 SIZE And ID Check
Fail>
Cause:
Detected by consistency check
between NVRAM size requested by the
system and actual size and consis-
tency check of ID recorded at the first
power-on.
FIP 1. 318
116-396
Network Error 116-396
Power Off/On the Printer.
If this failure occurs again,
please contact customer sup-
port.
<Fatal Error Related to Maillib Other
Errors (of File 2 Net Library)>
Cause:
S/W bug.
FIP 1. 319
116-719 -
<XPIF Parameter Cancelled>
Cause:
Due to conflict among multiple print
instructions, print instructions are
ignored.
FIP 1. 320
116-721
Memory Full 116-721
Job too large to Collate.
Job canceled.
*Caution screen with Close
button
<Collate Full>
Cause:
Unable to collate due to insufficient
memory.
FIP 1. 321
Status
Code
(3615)
LCD Display Name/Description of Error FIP