Xerox WorkCentre 3615

Troubleshooting
Phaser 3610, WorkCentre 3615 Service Manual2-116
117-344
Fax Error 117-344
Power Off/On the Printer.
If this failure occurs again,
please contact customer sup-
port.
<Fax Error>
Cause:
FLASHFILE task error.
FIP 1. 329
117-350
Fax Controller Error 117-350
Power Off/On the Printer.
If this failure occurs again,
please contact customer sup-
port.
<Controller Error>
Cause:
Task initialization (start) error.
FIP 1. 330
117-361
Scanner Parameter Error 117-
361
Power Off/On the Printer.
If this failure occurs again,
please contact customer sup-
port.
<IIT Parameter Verify NG>
Cause:
IIT registration adjustment value veri-
fication NG.
(Checked only at production process)
FIP 1. 331
117-362
Fax EEPROM Error 117-362
Power Off/On the Printer.
If this failure occurs again,
please contact customer sup-
port.
<EEPROM Sum Check Error>
Cause:
EEPROM sum check value error.
FIP 1. 332
117-363
Fax NVRAM Error 117-363
Power Off/On the Printer.
If this failure occurs again,
please contact customer sup-
port.
<NVM Sum Check Error>
Cause:
NVM sum check value error.
FIP 1. 333
117-365
Controller Clock Voltage Low
Error 117-365
Power Off/On the Printer.
If this failure occurs again,
please contact customer sup-
port.
<Low Voltage>
Cause:
RTC detected Low Voltage. RTC clock
setting and content of SRAM are
invalid. Initialize them.
FIP 1. 334
117-367
Scanner Controller Error 117-
367
Power Off/On the Printer.
If this failure occurs again,
please contact customer sup-
port.
<FXIF error>
Cause:
An error occurred on FXIF (such as the
Video Underrun error).
FIP 1. 335
Status
Code
(3615)
LCD Display Name/Description of Error FIP