EasyManua.ls Logo

Freescale Semiconductor MPC5553 - Page 227

Default Icon
1208 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
System Interface Unit (SIU)
MPC5553/MPC5554 Microcontroller Reference Manual, Rev. 5
6-48 Freescale Semiconductor
6.3.1.12.32 MPC5554: Pad Configuration Register 71 (SIU_PCR71)
The SIU_PCR71 register controls the pin function, direction, and static electrical attributes of the
TEA_GPIO[71] pin.
Figure 6-44. MPC5554: TEA_GPIO[71] Pad Configuration Register (SIU_PCR71)
Refer to Table 6-16 for bit field definitions.
Table 6-38. MPC5553: PCR71 PA Field Definition
PA Field Pin Function
0b000 GPIO[71]
0b001 TEA
0b010 Reserved
0b011 TEA
0b100 CAL_CS[0]
1
1
For calibration only.
Address: Base + 0x00CE Access: Read / write[5:11, 14:15]
0123456789101112131415
R 00000
PA OBE
1
1
When configured as TEA, the OBE bit has no effect. When configured as GPO, set the OBE bit to 1.
IBE
2
2
When configured as TEA or GPO, set the IBE bit to 1 to reflect the pin state in the corresponding GPDI register. Clear the IBE
to 0 to reduce power consumption. When configured as GPI, set the IBE bit to 1.
DSC ODE
3
3
When configured as TEA and external master operation is enabled, clear the ODE bit to 0.
HYS
4
4
If external master operation is enabled, clear the HYS bit to 0.
00
WPE
5
5
Refer to the EBI section for weak pullup settings when configured as TEA.
WPS
5
W
RESET: 000000001100001 1

Table of Contents

Related product manuals