MPC5553/MPC5554 Microcontroller Reference Manual, Rev. 5
19-28 Freescale Semiconductor
17–20 LCFT0
[0:3]
Last CFIFO to transfer to ADCn command buffer. Holds the CFIFO number of last CFIFO
to have initiated a command transfer to ADCn command buffer. LCFT0 has the following
values:
21–31 TC_LCFT0
[0:10]
Transfer counter for last CFIFO to transfer commands to ADCn command buffer. Indicates
the number of commands which have been completely transferred from CFIFOn when a
command transfer from CFIFOn to ADCn command buffer is initiated. TC_LCFT0 is a copy
of the corresponding TC_CFn in EQADC_CFTCRn (see Section 19.3.2.9) captured at the
time a command transfer from CFIFOn to ADCn command buffer is initiated. This field has
no meaning when LCFT0 is 0b1111.
0123456789101112131415
R CFS0_T1 CFS1_T1 CFS2_T1 CFS3_T1 CFS4_T1 CFS5_T1 0 0 0 0
W
Reset0000000000000000
Reg
Addr
Base + 0x00A4 (EQADC_CFSSR1)
16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
R 0 LCFT1 TC_LCFT1
W
Reset0111100000000000
Reg
Addr
Base + 0x00A4 (EQADC_CFSSR1)
Figure 19-12. eQADC CFIFO Status Snapshot Register 1 (EQADC_CFSSR1)
Table 19-14. EQADC_CFSSR0 Field Descriptions (Continued)
Bits Name Description
LCFT0[0:3] LCFT0 Meaning
0b0000 Last command was transferred from CFIFO0
0b0001 Last command was transferred from CFIFO1
0b0010 Last command was transferred from CFIFO2
0b0011 Last command was transferred from CFIFO3
0b0100 Last command was transferred from CFIFO4
0b0101 Last command was transferred from CFIFO5
0b0110–0b1110 Reserved
0b1111 No command was transferred to ADCn command buffer
To Next Page
Loading...