6 System Functions
System
Key Path
Visual annotation in the Show Alignment Statistics screen
Mode All
Remote Command
:CALibration:TIME:RFPSelector:LRADiated?
Example :CAL:TIME:RFPS:LRAD?
Notes Value is the date and time the last successful Align Now, 30 MHz – 3.6 GHz was executed. The date
is separated from the time by a semi-colon character.
State Saved No
Key Path
Visual annotation in the Show Alignment Statistics screen
Mode All
Remote Command
:CALibration:TEMPerature:RFPSelector:LRADiated?
Example :CAL:TEMP:RFPS:LRAD?
Notes Value is in degrees Centigrade at which the last successful Align Now, 30 MHz – 3.6 GHz was
executed.
State Saved No
Key Path
Visual annotation in the Show Alignment Statistics screen
Mode All
Remote Command
:CALibration:RFPSelector:SCHeduler:TIME:NEXT?
This query returns data using the following format “YYYY/MM/DD; HH:MM:SS”
Example :CAL:RFPS:SCH:TIME:NEXT?
Notes The next run time will be updated based on the start date/time and recurrence set by the users.
“date” is representation of the date the task will run in the form of “YYYY/MM/DD” where:
−YYYY is the four digit representation of year. (for example, 2009)
−MM is the two digit representation of month. (for example, 01 to 12)
−DD is the two digit representation of the day. (for example, 01 to 28, 29, 30 or 31 depending
on the month and year)
“time” is a representation of the time of day the task will run in the form of “HH:MM:SS” where:
−HH is the two digit representation of the hour in 24 hour format
−MM is the two digit representation of minute
−SS is the two digit representation of seconds
For model N9038A only.
State Saved No
EMI Receiver Mode Reference 307
To Next Page
Loading...
Need help?
General
