6 System Functions
System
If the serial number information in the backup file beingrestored is different from that of the instrument, the
following message appears (the serial number shown are examples):
he default restore location will be first drive identified as an external drive (USB or LAN) if such is available;
if not, the internal D: partition will be selected. The default restore file will be the most recent file that
matches the default backup file name format: AlignDataBackup_<model number>_<serial number>_
<date>.bak
Changing the drive letter also modifies the path displayed in the box below. When this step is first loaded,
the drive drop-down menu is populated with connected drives, which provide you with read access. The
path defaults to the AlignBackups folder. The most recent *.bak file in the folder will also be selected by
default.
EMI Receiver Mode Reference 313
To Next Page
Loading...
