MacDon M155 - Page 200

OPERATION
Attaching Header Transport Hitch to Header
Attach header transport hitch to header as follows:
1. Position end (A) of the aft section onto front wheel
hook (B).
2. Push down until latch (C) captures the end (A).
3. Secure latch (C) with clevis pin (D).
Figure 4.5
2: Transport Hitch
4. Remove the L-pin fr om end (A) o f aft section
(if installed).
Figure
4.53: Transport Hitch
5. Position end (B) of the forward section into end (A)
of th e aft section and lower f orwa rd section into
aft section.
Figu
re 4.54 : Transport Hitch
147649 184 Revision A