NEC Univerge SV8100 - IP Routing Table Setup

UNIVERGE SV8100 Issue 10.1
Programming Manual 2 - 65
Description
Use Program 10-45: IP Routing Table Setup to set up the IP Routing Table.
Caution! If any IP Address or NIC settings are changed, the system must be
reset for the changes to take affect.
Conditions
None
Program 10 : System Configuration Setup
10-45 : IP Routing Table Setup
Level:
SA
Input Data
Routing Table Number 001~100
Input Data
Item
No.
Item Input Data Default
01
Network
Address
0.0.0.0 ~ 126.255.255.254
128.0.0.0 ~ 191.254.255.254
192.0.0.0 ~ 223.255.255.254
0.0.0.0
02
Subnet
Mask
128.0.0.0
240.0.0.0
254.0.0.0
255.192.0.0
255.248.0.0
255.255.0.0
255.255.224.0
255.255.252.0
255.255.255.128
255.255.255.240
255.255.255.254
192.0.0.0
248.0.0.0
255.0.0.0
255.224.0.0
255.252.0.0
255.255.128.0
255.255.240.0
255.255.254.0
255.255.255.192
255.255.255.248
255.255.255.255
224.0.0.0
252.0.0.0
255.128.0.0
255.240.0.0
255.254.0.0
255.255.192.0
255.255.248.0
255.255.255.0
255.255.255.224
255.255.255.252
0.0.0.0
03
Default
Gateway
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.254.255.254
192.0.0.1 ~ 223.255.255.254
0.0.0.0