Issue 10.0 UNIVERGE SV8100
2 - 374 Program 23 : Answer Features Setup
Description
Use Program 23-03: Universal Answer/Auto Answer to assign trunk routes (set in
Program 14-06) to extensions for Universal Answer. If the call ringing the paging
system is in an extension assigned route, the user can dial the Universal Answer
code (
#0) to pick up the call.
You can also use this program to let an extension user automatically answer trunk
calls that ring other extensions (not their own). When the user lifts the handset, they
automatically answer the ringing calls based on Trunk Group Routing programming
(defined in Program 14-06). The extension user ringing calls, however, always have
priority over calls ringing other co-worker extensions. Refer to the Line Preference
feature in the UNIVERGE SV8100 Features and Specifications Manual for more
information.
Make one entry for each Night Service mode.
Conditions
None
Program 23 : Answer Features Setup
23-03: Universal Answer/Auto Answer
Level:
IN
Input Data
Extension Number Maximum eight digits
Day/Night Mode 1 ~ 8
Item
No.
Item Input Data Default
Related
Program
01
Route Table Number
Use this program to let an extension user automatically
answer trunk calls that ring other extensions. When the
user lifts the handset, they automatically answer the
ringing calls based on Trunk Group Routing
programming (defined in Program 14-06)
0~100 0 14-06
To Next Page
Loading...
