NEC Univerge SV8100 - Routing Mailbox

UNIVERGE SV8100 Issue 10.1
Programming Manual 2 - 293
Description
Use Program 20-34: Remote Conference Group Setup to define the Remote
Conference options.
Program 20 : System Option Setup
20-34: Remote Conference Group Setup
Level:
SA
Input Data
Remote Conference Group Number 1-4
Item
No.
Item Input Data Default
01
Conference Name
Enter the name displayed at the time of a
Remote Conference. This entry will display
on the keyset LCD.
Up to 12 characters
Group1 = Conf1
Group2 = Conf2
Group3 = Conf3
Group4 = Conf4
02
Password
Define the password of a Remote
Conference.
4 digits Fixed
(0-9, @ = wild character)
Group1 = 1111
Group2 = 2222
Group3 = 3333
Group4 = 4444
03
Define the maximum number of
participants of a Remote Conference.
0-32
8
04
Max Conference Duration
Define the maximum duration of a Remote
Conference.
When this time passes, the conference is
disconnected by the SV8100.
0-64800 seconds
7200
05
End Tone Alert Time
Determine how long prior disconnecting a
Remote Conference call (based on the
maximum conference duration above) the
SV8100 should send out a beep. This is
used to warn the conference participants of
the pending disconnect.
0-64800 seconds
300
06
Password Mode
0 = Normal
1 = Skip
0