NEC Univerge SV8100 - Outbound IP Connection Setup

Issue 10.1 UNIVERGE SV8100
2 - 928 Program 90 : Maintenance Program
Description
Use Program 90-69 : Outbound IP Connection Setup to set the outbound IP
connection information.
Conditions
None
Feature Cross Reference
None
Program 90 : Maintenance Program
90-69 : Outbound IP Connection Setup
Level:
IN
Input Data
Item
No.
Item Input Data Default
01
Port Number
Assign the port number used
for Outbound IP Connection
programming.
1~65535 8000
02
IP Address
Assign the IP Address that
the system will use for TCP
establishment request to I.E.
the IP address of the PC with
the waiting PC Programming.
0.0.0.0~255.255.255.255 0.0.0.0
03
Caller ID
Assign Caller ID number of
the system to compare with
the received Caller ID.
Maximum of 16 digits
(0~9, *, #)
None