NEC Univerge SV8100 - Operator Extension

Issue 10.1 UNIVERGE SV8100
2 - 274 Program 20 : System Option Setup
Description
Use Program 20-17 : Operator Extension to designate an operator. When an
extension user dials 0 or 9 (defined by Program 11-01 Type 5), calls go to the operator
selected in this program.
If you do not assign an extension in Program 90-11-01, system alarms appear on the
extension assigned in this option.
Conditions
None
Feature Cross Reference
 Intercom
Program 20 : System Option Setup
20-17 : Operator Extension
Level:
IN
Input Data
Operator Number 1~8
Item
No.
Item Input Data Default
Related
Program
01
Operator’s Extension Number
Define the extension numbers
which are to be used by operators.
Up to eight digits
No Setting (OT)
101 (AU)
11-01
20-01-01