NEC Univerge SV8100 - In-DHCP Server Setup

Issue 10.1 UNIVERGE SV8100
2 - 28 Program 10 : System Configuration Setup
Description
Use Program 10-13: In-DHCP Server Setup to setup the DHCP Server built into the
CD-CP00 blade.
Conditions
None
Feature Cross Reference
 Voice Over Internet Protocol (VoIP)
Program 10 : System Configuration Setup
10-13 : In-DHCP Server Setup
Level:
SA
Input Data
Item
No.
Item Input Data Default Description
01
DHCP Server
Mode
0 = Disable
1 = Enable
0
Enable or disable the use of the
built-in DHCP Server.
02
Lease Time
Days 0~255
0 day
Lease Time of the IP address to a
client.
Hour 0~23
0 hour
 Pressing the Transfer Key
increments to the next setting
data.
Minutes 0~59
30 minutes
05
Last DHCP Data
0 = Disable
1 = Enable
1
If 10-13-01 is enabled, this setting
determines if DHCP resource is
enabled or disabled.