NEC Univerge SV8100 - 90-07: Station Control

UNIVERGE SV8100 Issue 10.1
Programming Manual 2 - 865
Description
(This program is available via telephone programming and Web Programming, but
not through PC Programming).
Use Program 90-07: Station Control for extension maintenance.
Conditions
None
Feature Cross Reference
None
Program 90 : Maintenance Program
90-07: Station Control
Level:
SA
Input Data
Menu Number
1 = Hardware Reset
2 = Software Reset
Item
No.
Item Input Data
01
Extension Control
Extension Number (up to eight digits)