NEC Univerge SV8100 - Upnp Setup

Issue 10.1 UNIVERGE SV8100
2 - 58 Program 10 : System Configuration Setup
Description
Use Program 10-37 : UPnP Setup to set the UPnP (Universal Plug and Play) options
for SIP trunks.
Conditions
None
Feature Cross Reference
None
Program 10 : System Configuration Setup
10-37 : UPnP Setup
Level:
IN
Input Data
Item
No.
Item Input Data Default
01
UPnP Mode
Router must support UPnP.
0 = Disable
1 = Enable
0
02
Retry Time
Set interval time to re-check the Router for the WAN
IP address. When this is set to 0 it will not retry.
0,60 ~ 3600
(1~59 cannot be input)
60