NEC Univerge SV8100 - Table 2-4 Lamp Cycle On;Off Timing Pattern

UNIVERGE SV8100 Issue 10.1
Programming Manual 2 - 183
53
Aspire Model-C Phone Operation
Mode (OT)
When this setting is assign “1”,
Aspire Model-C phone is working
with Model-B (Type-A) as following
key layout;
CALL1--> Answer
CALL2--> Feature
DND--> Conf
HOLD--> Hold
DIAL--> Directory
LND--> Redial
MIC-->Mic
SPK--> Speaker
MSG--> Message
FLASH--> Recall
CONF--> Transfer
0 = Original Operation
Mode
1 = CTI Special Operation
Mode
0
54
Menu Operation Mode
0 = Automatic Close
1 = Manual Close
0
57
Caller Log on Busy
0 = Off
1 = On
0 15-02-34
58
Display Mode of Incoming Trunk
0 = Caller ID
1 = Memo Information
0 13-04-08
13-04-09
13-04-10
69
Microphone Operation on
Handsfree
Select the microphone status when
starting Handsfree mode.
0 = No change for MIC status
1 = Start from MIC enabled
2 = Start from MIC muted
0
70
MIC Key Operation
Control whether the
microphone key is enabled (0)
or disabled (1).
0 = Enabled
1 = Disabled
0
Table 2-4 Lamp Cycle On/Off Timing Pattern
Programs 15-02-35, 36, and 38
Input Cycle
1 Cycle 1 500ms – ON / 500ms – OFF
2 Cycle 2 250ms – ON / 250ms – OFF
3 Cycle 3 125ms – ON / 125ms – OFF
4 Cycle 4 125ms – ON / 125ms – OFF / 125ms – ON / 625ms – OFF
5 Cycle 5 875ms – ON / 125ms – OFF
Item
No.
Item Input Data Default
Related
Program