NEC Univerge SV8100 - IP Trunk Data Setup

Issue 10.1 UNIVERGE SV8100
2 - 172 Program 14 : Trunk, Basic Setup
Description
Use Program 14-18 : IP Trunk Data Setup to define the basic setting of each IP
Trunk.
Conditions
None
Feature Cross Reference
None
Program 14 : Trunk, Basic Setup
14-18 : IP Trunk Data Setup
Level:
IN
Input Data
Trunk Port Number 001~200
Item
No.
Item Input Data Default
01
IP Trunk Type
This indicates the IP Trunk
type. (Read Only)
0 = None
1 = SIP
2 = H.323
3 = CCIS
0
02
System ID (SIP Trunk)
This indicates NetLink System
ID of the trunk when multiple
SIP trunks for NetLink is
enabled. (Read Only)
0 ~ 50
0
03
P2P Mode (SIP Trunk)
Select whether or not peer-to-
peer connection method is
used for the SIP Trunk.
0 = Disable
1 = Enable
0
04
Video Mode (SIP Trunk)
Select whether or not the Video
mode is used for the SIP Trunk.
0 = Disable
1 = Enable
0