UNIVERGE SV8100 Issue 10.1
Programming Manual 2 - 221
Description
Use Program 15-18 : Virtual Extension Key Enhanced Options to define the
operation when a Virtual Extension Key is pressed.
Program 15 : Extension, Basic Setup
15-18 : Virtual Extension Key Enhanced Options
Level:
IN
Input Data
Extension Number including Virtual Extensions Up to eight digits
Item
No.
Item Input Data Default
Related
Program
01
Virtual Extension Key Operation Mode
Define if calls to a Virtual Extension Key
land on the Virtual or on the extension/ CO
appearance.
This is assigned for the Virtual
Extension Key, not the extension it
resides on.
0 = Release
1 = Land on the
key
0 20-04-01
02
Display mode when placing a call on
Virtual Extension Key
Defines if calls to or from a Virtual
Extension Key display the Virtual
Extension Key name or the name of the
extension it resides on.
0 = Secondary
Extension
Name
1 = Actual Station
Name
0 (OT)
1 (AU)
03
Show CLI
When set to a 0, the caller ID of a trunk
call/station call pointed to a virtual
extension will not be displayed if the
virtual extension is not set to ring.
When set to a 1, the caller ID of a trunk
call pointed to a virtual extension WILL be
displayed if the virtual extension is not set
to ring. Station calls to a virtual that is not
assigned to ring will display the station
name or number if PRG 15-18-04 is set to
a 1.
0 = No CLI info
1 = Show CLI info
0 15-09-01
To Next Page
Loading...
