NEC Univerge SV8100 - 90-11: System Alarm Report

Issue 10.1 UNIVERGE SV8100
2 - 878 Program 90 : Maintenance Program
Description
Use Program 90-11: System Alarm Report to define the details of the system alarm
report.
Program 90 : Maintenance Program
90-11: System Alarm Report
Level:
IN
Input Data
Item
No.
Item Input Data Default
02
Report Method
When alarm reports are e-mailed, set this option to
1. E-mail address set in 90-11-08.
0 = No Report
1 = E-mail Address
0
04
--- Not Used ---
06
SMTP Host Name
When alarm reports are e-mailed, set the SMTP
name (ex: smtp.yourisp.com). Contact your ISP
(internet service provider) for the correct entry if
needed.
Up to 255 Characters
No
Setting
07
SMTP Host Port Number
When alarm reports are e-mailed, set the SMTP host
port number. Contact your ISP (internet service
provider) for the correct entry if needed.
0~65535
25
08
To E-mail Address
When alarm reports are e-mailed, set this e-mail
address to which the report should be sent.
Up to 255 Characters
No
Setting
09
Reply Address
When alarm reports are e-mailed, set the e-mail
address where replies should be e-mailed.
Up to 255 Characters
No
Setting
10
From Address
When alarm reports are e-mailed, set this e-mail
address for the station sending the report.
Up to 255 Characters
No
Setting
11
DNS Primary Address
When alarm reports are e-mailed, set the DNS
primary address.
0.0.0.0~255.255.255.255
0.0.0.0
12
DNS Secondary Address
When alarm reports are e-mailed, set the DNS
secondary address.
0.0.0.0~255.255.255.255
0.0.0.0