NEC Univerge SV8100 - Class of Service Options (Hold;Transfer Service)

UNIVERGE SV8100 Issue 10.1
Programming Manual 2 - 257
Description
Use Program 20-11 : Class of Service Options (Hold/Transfer Service) to define
the Hold and Transfer feature availability for each extension Class of Service (COS).
Program 20 : System Option Setup
20-11 : Class of Service Options (Hold/Transfer Service)
Level:
IN
Input Data
Class of Service Number 01~15
Item
No.
Item Input Data
Default
COS 01~15
01
Call Forward All
Turns off or on an extension ability to initiate Call
Forwarding All.
0 = Off
1 = On
1
02
Call Forward When Busy
Turns off or on an extension ability to use Call
Forward when Busy.
0 = Off
1 = On
1
03
Call Forwarding When Unanswered
Turns off or on an extension ability to use Call
Forward when Unanswered.
0 = Off
1 = On
1
04
Call Forwarding (Both Ringing)
Turns off or on an extension ability to activate Call
Forwarding with Both Ringing.
0 = Off
1 = On
1
05
Call Forwarding with Follow Me
Turns off or on an extension ability to initiate Call
Forwarding with Follow Me.
0 = Off
1 = On
1
06
Unscreened Transfer (Ring Inward Transfer)
Turns off or on an extension ability to use Unscreened
Transfer.
0 = Off
1 = On
1
07
Transfer Without Holding
Turns off or on an extension ability to use Transfer
Without Holding.
0 = Off
1 = On
0
08
Transfer Information Display
Turns off or on an extension ability for incoming
Transfer preanswer display.
0 = Off
1 = On
1