Issue 10.1 UNIVERGE SV8100
2 - 664 Program 51 : NetLink Service
Description
Use Program 51-18: NetLink Configuration Options to set the NetLink Fail-Over
limits. .
Conditions
None
Feature Cross Reference
None
Program 51 : NetLink Service
51-18: NetLink Configuration Options
Level:
IN
Input Data
System ID
1 -50
Item
No.
Item Input Data Default
01
NetLink Fail-Over Limit
When tear-down of network was repeated more than the
specified times, NetLink is operated stand-alone.
0, 2~10
(0 = Infinity)
0
To Next Page
Loading...
