NEC Univerge SV8100 - ISDN BRI & PRI Layer 2 (T-Point) Initial Data Setup

UNIVERGE SV8100 Issue 10.1
Programming Manual 2 - 703
Description
Use Program 81-05: ISDN BRI & PRI Layer 2 (T-Point) Initial Data Setup to define
the various basic data for layer 2 of ISDN BRI and PRI.
Program 81 : Basic Hardware Setup for Trunk
81-05 : ISDN BRI & PRI Layer 2 (T-Point) Initial Data Setup
Level:
MF
Input Data
Item
No.
Item Description Input Data Default
01
Timer T200 Specify the timer value
in 1/100ths of a
second at the end of
which transmission of
a frame may be
initiated.
1~255
(100~25500ms)
10 (1sec)
02
Timer T201 Specify the minimum
time in
1/100ths of a second
between
retransmissions of the
TEI Identity check
messages.
1~255
(100~25500ms)
10 (1sec)
03
Timer T202 Specify the minimum
time in
1/100ths of a second
between
retransmissions of the
TEI Identity check
messages.
1~255
(100~25500ms)
20 (2sec)
04
Timer T203 Specify the maximum
time in
1/100ths of a second
allowed without
exchanging frames.
1~255
(100~25500ms)
250 (25sec)
05
N200 Specify the
retransmission count.
1~255
3
06
N201 Specify the frame
lengths in ocelots.
1~65535 (Byte)
260
07
N202 Specify the maximum
number of
transmissions from a
TEI identity request
message when the
user requests a TEI.
1~255
3