NEC Univerge SV8100 - Service Code Setup (for Setup;Entry Operation)

Issue 10.1 UNIVERGE SV8100
2 - 108 Program 11 : System Numbering
Description
Use Program 11-11: Service Code Setup (for Setup/Entry Operation) to
customize the Service Codes which are used for registration and setup. You can
customize additional Service Codes in Programs 11-10, and 11-12 ~ 11-16.
The following chart shows:
 The number of each code (01~65).
 The function of the Service Code.
 What type of telephones can use the Service Code.
 The default entry. For example, users to turn on or turn off Background Music by
dialing the number set at item 18.
Program 11 : System Numbering
11-11 : Service Code Setup (for Setup/Entry Operation)
Level:
IN
Input Data
Item
No.
Item Terminals
Default
(OT)
Default
(AU)
Related
Program
01
Call Forward – All
MLT, SLT 848 741
02
Call Forward – Busy
MLT, SLT 843 742
03
Call Forward – No Answer
MLT, SLT 845 743
04
Call Forward – Busy/No Answer
MLT, SLT 844 744
05
Call Forward – Both Ring
MLT, SLT 842 745
06
--- Not Used ---
07
Call Forwarding – Follow-Me
MLT, SLT 846 746
08
Do Not Disturb
MLT, SLT 847 747
09
Answer Message Waiting
MLT, SLT 841 *0 11-10-16
10
Cancel All Messages Waiting
MLT, SLT 873 773
11
Cancel Message Waiting
MLT, SLT 871 771
12
Alarm Clock
MLT, SLT 827 727 20-01-06
13
Display Language Selection for
Multiline Terminal
MLT 778 678 15-02