NEC Univerge SV8100 - 21-18: IP Trunk (H.323) Calling Party Number Setup for Extension

Issue 10.1 UNIVERGE SV8100
2 - 334 Program 21 : Outgoing Call Setup
Description
Use Program 21-18: IP Trunk (H.323) Calling Party Number Setup for Extension
to assign the Calling Party Number for each extension. The assigned number is sent
to the exchange when the caller places an outgoing call.

When the Calling Party Number is assigned by PRG 21-17, 21-18 and 21-19, the
system uses the data in PRG 21-18 and PRG 21-19.
Conditions
None
Feature Cross Reference
None
Program 21 : Outgoing Call Setup
21-18: IP Trunk (H.323) Calling Party Number Setup for Extension
Level:
IN
Input Data
Extension Number Up to eight digits
Item
No.
Description Input Data Default
01
IP Trunk (H.323) Calling Party Number
Setup for Extension
Up to 16 digits
(1~0,
, #)
None