UNIVERGE SV8100 Issue 10.1
Programming Manual 2 - 455
Description
Use Program 34-02: E&M Tie Line Class of Service to assign a Class of Service to
a Tie line (there are 15 Tie line Classes of Service). The Class of Service options are
defined in Program 20-14. For each Tie line, make a separate entry for each Night
Service mode.
Conditions
Program 20-06 cannot be used to assign Class of Service to Tie lines.
Feature Cross Reference
Tie Lines
Program 34 : Tie Line Setup
34-02: E&M Tie Line Class of Service
Level:
IN
Input Data
Trunk Port Number 1~200
Day/Night Mode 1~8
Item No. Item Input Default Related Program
01 Class of Service 1~15 1 20-14
To Next Page
Loading...
