NEC Univerge SV8100 - Program 16: Department Group Setup; 16-01: Department Group Basic Data Setup

Programming Manual 2 - 231
Program
16
Description
Use Program 16-01: Department Group Basic Data Setup to set the
function mode for each department group. There are 64 available Department
Groups.
Program 16 : Department Group Setup
16-01: Department Group Basic Data Setup
Level:
IN
Input Data
Department Group Number 1~64
Item
No.
Item Input Data Default
Related
Program
01
Department Name
Maximum 12 characters
No
setting
11-07
02
Department Calling Cycle
Use this option to set the call
routing for Department Calling.
Routing can be either circular
(cycles to all phones in group)
or priority (cycles to highest
priority extensions first).
0 = Normal Routing
(Priority)
1 = Easy – UCD
Routing (Circular)
0 16-02
03
Department Routing when
Busy (Auto Step Call)
Use this option to set how the
system routes an Intercom call
to a busy Department Group
member. Intercom callers to the
extension can either hear busy
or route to the first available
department number. This only
occurs for calls to the extension
directly, not the department
number assigned in Program
11-07.
0 = Normal (Intercom
caller to busy
department
member hears
busy)
1 = Circular (Intercom
callers to busy
department
member routes to
idle member)
0 16-02