NEC Univerge SV8100 - 85-05: ETIA VLAN Group Settings (AU)

Issue 10.1 UNIVERGE SV8100
2 - 854 Program 85 : Hardware Setup for ETIA Switch
Description
Use Program 85-05: ETIA VLAN Group Settings to define the VLAN group setup
for each ETIA blade.
Program 85 : Hardware Setup for ETIA Switch
85-05: ETIA VLAN Group Settings (AU)
Level:
IN
Input Data
Slot 1~24
VLAN Group 00~15
Item
No.
Item Input Data Default Description
01
VLAN ID
0~4095
0 802.1q VLAN ID
02
Port
00000000~11111111
00000000 Represents the eight physical
ports of the ETIA, numbered from
left to right as 8 to 1. Setting a port
to 1 enables the port to allow
traffic from the VLAN ID specified
in Program 85-05-01.
03
Tag Egress
Retention
00000000~11111111
00000000 Represents the eight physical
ports of the ETIA, numbered from
left to right as 8 to 1.
At the point of egress, should
VLAN tags be retained or
removed? (Many Ethernet
devices do not process VLAN
tagged packets.) Setting a port to
1 permits VLAN tags to be
retained.