NEC Univerge SV8100 - Delete All Extension Numbers

UNIVERGE SV8100 Issue 10.1
Programming Manual 2 - 933
Description
(This program is available only via telephone programming and not through PC
Programming).
Use Program 92-02: Delete All Extension Numbers to delete all extension
numbers. However, the extension number of the first port is not deleted.
Conditions
None
Feature Cross Reference
None
Program 92 : Copy Program
92-02 : Delete All Extension Numbers
Level:
IN
Input Data
Extension No. Delete Yes: 1 [Dial 1] + Transfer key (Only press Transfer key is canceled)