NEC Univerge SV8100 - 90-12: System Alarm Output

Issue 10.1 UNIVERGE SV8100
2 - 880 Program 90 : Maintenance Program
Description
Use Program 90-12: System Alarm Output to set the options for the alarm report.
This program has six separate menu options. Define the output port to be used as the
output for system alarm report and set the system alarm options. The system can
have up to 50 reports.
Conditions
None
Feature Cross Reference
None
Program 90 : Maintenance Program
90-12: System Alarm Output
Level:
IN
Input Data
Item
No.
Item Input Data Default
01
Output Port Type
Indicate the type of connection used for the System
Alarms. The baud rate for the COM port should be
set in Program 10-21-02.
0 = No Setting
1~3 = -- Reserved --
4 = CTA/CTU
5 = USB Memory
0
02
CTA Output Destination Extension Number
Up to eight digits
No Setting