NEC Univerge SV8100 - Table 2-10 47-02-16 Default Table

UNIVERGE SV8100 Issue 10.1
Programming Manual 2 - 567
17
Enable Paging 0 = No (Disabled)
1 = Yes (Enabled)
0
18
Paging Option 0 = RNA
1 = Immediately
0
19
Telephone User Interface Type 0 = Numeric
1 = Mnemonic
0
20
Enable E-mail Notification
(Not supported in V1.0)
0 = No
1 = Yes
0
21
E-mail Address
(Not supported in V1.0)
Up to 48 characters
No Setting
22
Include Message as Attachment
(Not supported in V1.0)
0 = No
1 = Yes
1
23
All Message Notification Enabled 0 = No
1 = Yes
1
24
All Find-Me Follow-Me Enabled 0 = No
1 = Yes
0
25
Security Code Option 0 = Always
1 = Remote Logon
Only
0
26
Station Mailbox Options - Auto Play 0 = Disabled
1 = Enabled
0
27
Email Message Save/Delete Option
Either save or delete the message in the Station
Mailbox after email is sent.
0 = No change
1 = Save
2 = Delete
0
28
Station Mailbox Message Notification Options -
Queuing.
Use this option to enable or disable Message
Notification Queuing. If enabled, Message
Notification is stored in queue when there is no
active notification destination.
0 = Disabled
1 = Enabled
0
Table 2-10 47-02-16 Default Table
Item Name Input Data
47-02-16 Voice Prompt Language 01 = US English
02 = UK English
03 = Australian English
Input Data
Item
No.
Item Input Data Default