NEC Univerge SV8100 - Hotel;Motel Telephone Setup

Issue 10.1 UNIVERGE SV8100
2 - 518 Program 42 : Hotel Setup
Description
Use Program 42-02 : Hotel/Motel Telephone Setup to define the basic operation of
the Hotel/Motel extensions.
Program 42 : Hotel Setup
42-02 : Hotel/Motel Telephone Setup
Level:
IN
Input Data
Extension Number Up to eight digits
Item
No.
Item Input Data Default
01
Hotel Mode
If you want an extension to operate in the
Hotel/Motel mode, enter 1. If you want the
telephone to operate in the business mode,
enter 0.
0 = Normal
1 = Hotel
0
02
Toll Restriction Class When Check In
Assign an extension Toll Restriction Class
when it is checked in. The system has 15 Toll
Restriction Classes (1~15). The entry you
make in this option affects the telephone in
all Night Service modes. (Refer to Programs
21-05 and 21-06 to set up the Toll Restriction
dialing options.) When the extension is
checked out, it uses the Toll Restriction Class
set in Program 21-04.
1~15
1
03
Room Status
This is a read only setting that shows the
current room status setting.
1 = Room Clean (Occupied)
2 = Maid Required
3 = Maid in Room
4 = Inspection Required
5 = Maintenance Request
6 = Out of Order
7 = Reserve 1
8 = Reserve 2
9 = Reserve 3
0 = Room Clean (Vacant)
 = Reserve 5
# = Reserve 6
-