Issue 10.1 UNIVERGE SV8100
2 - 452 Program 33 : CTA and ACI Setup
Description
Use Program 33-02: ACI Department Calling Group to assign ACI ports to
Department Groups. An ACI port can be in only one group.
Also use this program to set the ACI port priority. When a call comes into the ACI
Department Group, it connects to the ACI port in order of its priority. A higher priority
port (e.g., 1) receives calls before a lower priority port (e.g., 6). There are 96 ACI ports
and 16 ACI Department Groups available.
Default
Conditions
None
Feature Cross Reference
Analog Communications Interface (ACI)
Program 33 : CTA and ACI Setup
33-02: ACI Department Calling Group
Level:
IN
Input Data
ACI Port Number 01~96
Item No. Group Number Priority Default
01 01~16 1~96 See Below
ACI Port Group Priority
01 1 1
02 1 2
:::
96 1 96
To Next Page
Loading...
