NEC Univerge SV8100 - External Speaker Control

UNIVERGE SV8100 Issue 10.1
Programming Manual 2 - 443
Description
Use Program 31-06 : External Speaker Control to define the settings for the
external speaker using an amplifier.
Program 31 : Paging Setup
31-06 : External Speaker Control
Level:
IN
Input Data
External Speaker Number 1~9 (9 = CD-CP00)
Item
No.
Item Input Data Default
01
Broadcast Splash Tone Before
Paging (Paging Start Tone)
Use this option to enable or
disable splash tone before Paging
over an external zone. If enabled,
the system broadcasts a splash
tone before the External Paging
announcement.
0 = No Tone (None)
1=Splash Tone
2 = Chime Tone
2
02
Broadcast Splash Tone After
Paging (Paging End Time)
Use this option to enable or
disable splash tone after Paging
over an external zone. If enabled,
the system broadcasts a splash
tone at the end of an External
Paging announcement.
0 = No Tone (None)
1=Splash Tone
2 = Chime Tone
2
03
Speech Path
Determine if the external speaker
will be used for talkback (As this
option is not available with the
CD-CP00 external page zone,
speaker 9 should be left at 1).
0 = Both Way (Duplex)
1 = One Way (PGD Adapter
 SPK)
(Simplex)
1
04
CODEC Transmit Gain Setup
1~63 (-15.5 ~ +15.5dB)
32 (0dB)
05
CODEC Receive Gain Setup
1~63 (-15.5 ~ +15.5dB)
32 (0dB)